Skip to main content

Planning – Application Dates

Help with this page (opens in a new window)

19/0720/TRE | T1 Oak: To remove the 2 lowest limbs to the branch collar on the main stem, making pruning cuts of up to 100mm in diameter. To reduce low laterals overhanging the cottage roof by approximately 2.5 metres via target pruning, making pruning cuts of up to 60mm in diameter T2 Oak To crown raise to approximately 5 metres above ground level, removing small laterals to the branch collar at the union with the main stem, making pruning cuts up to 60mm in diameter. T3 Oak To remove low secondary limb overhanging cottage roof to union with primary limb, making a pruning cut of up to 100mm in diameter To reduce lateral 3rd order limbs by approximately 2.5 metres via target pruning, making final pruning cuts of up to 50mm in diameter T4 Oak To remove low hanging secondary limb to union with primary limb making a final pruning cut of up to 100mm in diameter The above works are requested in order to give clearance to the cottage roof below and to reduce weight on lateral limbs overhanging the property. | Higher Metcombe Cottage Higher Metcombe Ottery St Mary EX11 1SR
Application Validated Date Wed 03 Apr 2019
Expiry Date Fri 10 May 2019
Actual Committee Date
Last Advertised In Press Date Wed 17 Apr 2019
Agreed Expiry Date
Decision Printed Date Thu 23 May 2019
Environmental Impact Assessment Received
Temporary Permission Expiry Date

an Idox solution